Drain Cleaning Hose for Pressure Washers | 10/15/20/30 m

Application

This hose is specially designed for drain cleaning. It can remove stubborn dirt, clean gutters and drains, clear waste pipes, and strip paint and sandblast residue. The hose is extremely flexible, easy to use, and pulls itself through the pipe via the rear-facing nozzles. A pressure washer is required for operation.

Sewer Jet Hose Construction

• Cover Layer: Wear-resistant polyurethane, resistant to oil, weather, ozone and abrasion
• Steel Wire Reinforcement: High-strength steel wire textile braid for high pressure
• Polyester Reinforcement: Polyester textile braid with high flexibility
• Inner Tube: Thermoplastic polyester

Button-Nose Sewer Jetter Nozzle

• Front jet at 0° spray angle to remove blockages
• Three rear nozzles with 33° spray angle flush out loosened debris

Rotating Sewer Nozzle

• Three rearward rotating spray bursts propel the nozzle through the pipe
• Easily inserts into drain pipes and sewer lines
• Even cleaning and effective rinsing of dirt

Compatibility

Fits pressure washers such as LAVOR, Kärcher K1-K7, COMET, BAUKER, VAX, BS, LAKONI, Yili and other models. Connection via quick connect to the gun and pressure washer.

Technical Data

• Pipe lengths: 10 m, 15 m, 20 m, 30 m
• Operating pressure: up to 160 bar
• Burst pressure: up to 480 bar
• Water temperature: up to 60°C
• Inlet: M22 F (internal thread)
• Outlet: 1/4" M (external thread)
• Adapters: M22 - Kärcher bayonet, M22 - LAVOR bayonet
• Fixed nozzle: 3 rear jets + 1 front jet, max. 480 L/h
• Rotating nozzle: 3 rear jets, max. 480 L/h
• Connection thread: 1/4 inch

Nozzle Arrangement

• Fixed: 3 rear jets, 1 front-facing jet
• Rotating: 3 rear jets