Electric cartridge press silicone syringe with 2 batteries 7840N cartridge gun with LED

This cartridge press is not suitable for squeezing out material with higher viscosity, such as car window adhesive.

【With 8 in 1 silicone remover tool】

Replace old sealants like a pro: Quickly remove the silicone sealant with the scraper in the flat or V-head design. Sealant nozzles and silicone joint scrapers can be used as joint smoothers for silicone. This saves sealant!

【25-piece set】

There are 16 different sizes of stainless steel rivet nozzles: 6/7/9/10/11/12/13/14/15/16/18/20/22/25/28/30 mm. The set also includes 6 connecting bases, 2 angle brackets, and 1 extension rod. The variety of sizes makes it easy to fill and close different angles and gaps, thus facilitating your repair work!

【Cartridge holder】

The cartridge holder is 350 mm long and has an inner diameter of 51 mm. It is suitable for various applications such as household glass adhesive (for interior decoration in the home) and silicone structural adhesive (for bonding large glass structures outdoors). It is also suitable for use with both soft and hard adhesives. The soft rubber cylinder has a maximum capacity of 600 ml, while the hard rubber cylinder has a maximum capacity of 310 ml.

【Automatic retraction mode】
When you release the trigger, the cartridge gun automatically returns to retraction mode to prevent waste and glue spillage. The spring-loaded trigger and control knob allow you to precisely control the flow rate and adjust the spray distance. This gives you full control over the adhesive application and helps you achieve precise results.

【Versatile functions】
· Push rod: Exerts pressure of up to 7840 N on the cartridge to push the adhesive out of the container.
LED: Used for lighting purposes.
· Speed ​​controller: The speed can be adjusted in 6 steps from 1 to 6.

· Switch: ON / OFF; By double-clicking the switch on the cartridge gun, the adhesive cartridge can be fed automatically.

Functional description of the components
· Attachment nozzle: Controls and regulates the direction and speed of the adhesive flow
Cartridge holder: Length = 350mm, inner diameter = 51mm. Suitable for household glass adhesives (for interior decoration in the home), silicone structural adhesives (for bonding large glass structures outdoors), and soft and hard adhesives.
· Push rod: Exerts pressure of up to 7840 N on the cartridge to push the adhesive out of the container.
Limit switch: Triggers when the feed rod is fully retracted to prevent over-retraction.
· Clutch: By pressing the clutch the feed rod can be pulled out manually.
LED: Used for lighting purposes.
· Switch: ON / OFF; By double-clicking the switch on the cartridge gun, the adhesive cartridge can be fed automatically.
· Speed ​​controller: The speed can be adjusted in 6 steps from 1 to 6.
· Battery indicator light: The battery indicator.
· 2*BATTERY: 2000mAh lithium-ion battery.

Specifications

Maximum output power: 500 W
Maximum pressure: 7840 N
Thrust speed: 0-32 mm/s
Specification of the soft rubber cylinder: maximum 600 ml
Specification of the hard rubber cylinder: maximum 310 ml
Cartridge holder: length = 350mm, inner diameter = 51mm.
Vibration level: less than 2.5 m/s2
Sound pressure level: less than 70 dB (A)
Stainless steel nozzle size: 6/7/9/10/11/12/13/14/15/16/18/20/22/25/28/30 mm.

Package includes:
1 * Cartridge gun（low battery）
1 * Storage box
2 * 2000mAh lithium-ion battery.
1 * Battery charger
25 *Sealing nozzle & replacement base
8 * Silicone remover tool