Heating circuit manifold | 4-8 way | With vent valve | 1" ball valves | 3/4" Eurocone connections

Technical data:
Distributor with 2 heating circuits
To connect the various heating pipes, 3/4" Eurocone compression fittings are required (not included).
Distribution bar: stainless steel WSt-No. 1.4301
Side connection (connection to the heat generator): 1" internal thread
Flow bar: with 4-8 (optionally selectable) flow meters, display range: 0.5 - 5.0 l / min
Return bar: with actuators
Outlets of the individual heating circuits: 3/4" AG with Eurocone
Distance between individual outlets: 50 mm
Distributor length: (see product image)
Flow regulation with bleeder key on the return valve or directly on the flow meter

Details
Items included in delivery
- 2 distribution bars
- 2 soundproofed distributor holders
- 2 ball valves 1"
- 0.5-5 L/Min flow indicator (4-8 options optional)
- Actuators (4-8-way optionally selectable)
- Valve inserts 30 x 1.5 mm
- 2 automatic air vents (1/2", Max. 10 Bar, Max. 110℃) !!!
- Connections for Eurocone 3/4"
- max. operating temperature 60 °C
- max. operating pressure 5 bar
The distributor is delivered pre-assembled

Hinwels bel regulation
·Please ensure that the Krels shut-off valves are 100% open before you start adjusting
It may be necessary to repeat the adjustment until all circuits have the desired flow rate.
If the target flow rate is not known, you can set a value of 2Ltr./min.

Maintenance regulations
In principle, this product functions without maintenance and care, but it is recommended to check it annually;
-close the shut-off valves properly
-is the volume flow as set
-no leak traces visible
·Cleaning may only be done with a slightly damp cloth, do not use cleaning agents
The sight glasses of the flow meters can become dirty after a few minutes. These can be cleaned or replaced according to instructions.